Torque Equation for DC Motor Torque is a rotational force that helps for rotating the armature of DC motor. Torque is produced by electromagnetic effect. In simple words we can say that, when a conductor carrying current placed in a magnetic field or flux a mechanical force experienced by the conductors and conductor moves in […]
Author: Author
Lead Acid Battery
Lead Acid Battery There are two types current namely ac and dc. We know that, DC current can be stored. The electrical energy in dc nature store in the form of chemical energy. The device that stores electrical energy in chemical energy is called “electric cell“. Electric cell has small storage capacity. So cells are connected […]
Superposition Theorem
Superposition Theorem This theorem is useful for those circuits that contain two or more than two sources. This theorem is applicable only when network or circuit contains with linear elements. The sources of emf connected only in parallel not in series. According to this theorem the current flowing through any section is the algebraic sum […]
Insulating Materials
Insulating Materials Insulating materials are the materials that is able to insulate. It prevent the current flows through them. The materials that posses insulating properties is called an insulator. In this article, we will study about classification, Properties, applications of insulating materials. Classification of insulating Materials Insulating Materials are divided into three types Solid insulating […]
Introduction to Electrical Machines
Electrical Machines Electrical Machines are the machines that required electrical energy for their operation. These machines may be ac or dc (means what kind of supply requires for their operation). The ac machines are two types static and rotating machines. On the other hand dc machines are only rotating one. In this article we will […]
Graph Theory
Graph Theory When all the elements in a circuit or network are replaced by lines with dots, such configuration is called graph of the network. The all elements such as capacitor, inductor or resistor must satisfy Kirchhoff’s laws. Based on these laws, we can form a number of equations in graph theory. Terminology Used in […]
Power Transformer and Distribution Transformer
Power Transformer and Distribution Transformer Transformer plays an important role in the area of electrical engineering. Transformer is used either for raising or lowering the voltage of ac supply. It is used at electrical energy generating station where basically it raise the voltage level of an ac supply and it is also used at substations […]
Transformer on No-Load
Transformer on No-Load Transformer on No-Load transformer, there is no iron losses and copper losses. The ideal transformer is not practically possible. In case actual transformer these losses are present. When an actual transformer put on load, there is iron loss in the core and copper loss in the windings. When secondary of the transformer […]
Electric Heating
Electric Heating An electrical energy at generating station then transmitted to a load centers. The electrical energy use for various applications such as heating, lighting, welding etc. The conversion of electrical energy into other suitable for is very simple and convenient. When an electric current passed through a high resistance wire heat is produced. In […]
Induction Type Wattmeter
Induction Type Wattmeter Induction type wattmeter can be used to measure as power only. In last article we have studied about dynamometer type wattmeter which can be used to measure dc as well as ac power. Working Principle Induction type wattmeter works on induction principle. Construction of induction type wattmeter Induction type wattmeter consists of […]